North American B-25 Mitchell Armament |
|||||
The Browning M1919 is a .30 caliber medium machine
gun family widely used during the 20th century. It was used as a light infantry, coaxial, mounted, aircraft, and anti-aircraft
machine gun by the U.S. and many other countries, especially during World War II, the Korea Conflict, and the Vietnam War. Many M1919s were rechambered for the new 7.62 × 51 mm NATO
round and served into the 1990s, as well as up to the present day in some countries. The United States Navy also converted
many to 7.62 mm NATO, and designated them Mk 21 Mod 0; they were commonly used on river craft in the 1960s and 1970s
in Vietnam.
The Browning .50 caliber
machine gun has been used extensively as a vehicle weapon and for aircraft armament by the History
A variant without a water
jacket, but with a thicker-walled, air-cooled barrel superseded it (air-cooled barrels had already been used on variants
for use on aircraft, but these quickly overheated in ground use). This new variant was then designated the M2 HB ("HB"
for "Heavy Barrel"). The added mass and surface area of the new barrel compensated, somewhat, for the loss of
water-cooling, while reducing bulk and weight (the M2 weighed 121lb, with water, whereas the M2 HB weighs 84
lb). Due to the long procedure for changing the barrel, an improved system was developed called QCB (quick change barrel).
A lightweight version, weighing 24 lb (11 kg) less—a mere 60 lb (27 kg)—was also developed
Design details
The M2 is a scaled-up
version of John Browning's M1917 .30 caliber machine gun (even using the same timing gauges), fires the .50 BMG cartridge,
which today is also used in high-powered The M2 has a maximum range
of 7.4 kilometers (4.55 miles), with a maximum effective range of 1.8 kilometers (1.2 miles) when fired from the M3 Because the M2 was intentionally
designed to be fit into many configurations, it can be adapted to feed from the left or right side of the weapon by exchanging
the belt-holding pawls, the belt feed pawl, and the front and rear cartridge stops, then reversing the bolt switch. The conversion
can be completed in under a minute with no tools.
There are several different
types of ammunition used in the M2HB, including the current types: M33 Ball (706.7 grain) for personnel and light material
targets, M17 tracer, M8 API (622.5 grain), M20 API-T (619 grain), and M962 SLAP-T. The latter ammunition along with the M903
SLAP (Saboted Light Armor Penetrator) round can penetrate up to 3/4 inch armor at 1500 meters. This is achieved by using a
.30 inch diameter tungsten penetrator. The SLAP-T adds a tracer charge to the base of the ammunition. This ammunition was
type classified in 1993.
When firing blanks, a
large Combat use
The M2 .50 Browning machine
gun has been used for various roles: United States
At the outbreak of the
Second World War the United States had versions of the M2 in service primarily as fixed aircraft guns and as anti-aircraft
weapons (mounted on and off a wide variety of vehicles and ships). It was also technically still in service as an anti-tank
weapon, as originally intended. On most of the vehicles the weapon was mounted on it was placed in a position designed for
anti-aircraft rather than any other use. Units in the field often modified the mountings on their vehicles, especially tanks
and tank destroyers, to be more useful in the anti-personnel role. Reports vary on its effectiveness in this role. There are
instances of reports about the "essential" nature of the weapon for anti-personnel uses. M2 variants
The basic M2 was deployed
in US service in a number of subvariants, all with separate complete designations as per the US Army system. The basic designation
as mentioned in the introduction is Browning Machine Gun, Cal. .50, M2, with others as described below.
The development of the
M1921 water-cooled machine gun which led to the M2, meant that the initial M2s were in fact water-cooled. These weapons were
designated Browning Machine Gun, Cal. .50, M2, Water-Cooled, Flexible. There was no fixed water-cooled version.
Improved air-cooled heavy
barrel versions came in three subtypes. The basic infantry model, Browning Machine Gun, Cal. .50, M2, HB, Flexible,
a fixed developed for use on the A number of additional
subvariants were developed after the end of the Second World War. The Caliber .50 Machine Gun, Browning, M2, Heavy Barrel,
M48 Turret Type was developed for the commander's cupola on the AN/M2, M3,
XM296/M296, and GAU-10/A
The M2 machine
gun was heavily used as a remote fired fixed weapon, primarily in aircraft, but also in other applications. For this a variant
of the M2 was developed (sometimes seen under the designation AN/M2, but it is important to note that there were .30
and .50 caliber weapons with this designation), with the ability to fire from a solenoid trigger. For aircraft mounting some
were also fitted with substantially lighter barrels, permitted by the cooling effect of air in the slip-stream. The official
designation for this weapon was Browning Machine Gun, Aircraft, Cal. .50, M2 followed by either "Fixed" or Flexible"
depending on whether the weapon was used as a fixed forward firing gun or for use by an airplane's crew.
The 5-inch FFAR suffered from insufficient speed because
of its small motor. Therefore the development of a larger rocket motor with 5-inch diameter was begun, and the first test
firings occurred in December 1943. When fitted with the warhead of the 5-inch FFAR, the rocket achieved a velocity of 1530
km/h (950 mph), making it a very powerful weapon for its time. It was officially designated as 5-Inch HVAR (High-Velocity
Aircraft Rocket), but often called Holy Moses. It became operational in July 1944, and was used by Army Air Force and Navy
aircraft.
|
||||||||||